Race Fans Forever is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How To Open Lund Tonneau Covers

How To Open Lund Tonneau Covers

By PattyKay Lilley

If you’re looking to secure your truck bed and valuables, a Lund tonneau cover is an excellent choice for its easy installation and superior protection. Unlike traditional soft covers that require tedious disassembly when not in use, Lund truck bed covers install quickly with no fuss or hassle.

In this blog post, we’ll walk you through the step-by-step process of installing a Lund tonneau cover so you can easily keep your items safe from the elements without sacrificing convenience. Read on to find out how to open Lund tonneau covers today!

How To Open Lund Tonneau Covers

Opening a Lund tonneau cover is quite straightforward and requires little technical knowledge. First, stand at the tailgate of your truck. You will see the Lund logo on the rear section of the tonneau cover.

Next, find the latch mechanism, which is usually located directly under this logo. Grasp this latch firmly and pull it towards you. This should release the rear section of the cover.

Once the latch is released, you can begin to lift the tonneau cover. Take care while doing this as the cover is quite heavy. Lift the cover from the tailgate towards the cab of the truck. The cover should fold over onto itself, revealing the bed of your truck.

Lund tonneau covers are designed to stay in the open position once lifted. There are support rods on either side of the cover that lock into place to keep the cover open. To ensure your safety and the security of your belongings, always make sure these rods are locked into place before loading or unloading your truck bed.

Now, you’re all set! Accessing your truck bed is simple and quick with a Lund tonneau cover. Remember to always handle the cover with both hands and close it securely after use. Enjoy the convenience and security of your Lund tonneau cover!

How to Install Lund Tonneau Cover Again

How to Install Lund Tonneau Cover Again

Reinstalling the Lund tonneau cover after removal is a straightforward process. Start by aligning the front edge of the tonneau cover with the front edge of your truck’s bed. Ensure that the cover is centered and the edges are flush with the bed rails.

Next, unfold the cover towards the tailgate. As you do this, make sure the side seals are lying flat on the bed rails. The latches under the cover should align with the side rails of the truck bed. This is crucial to secure the cover properly.

Once the alignment is right, secure the cover by closing the latches. Most Lund tonneau covers have a latch mechanism on either side of the bed. To close the latch, slide it under the bed rail and then push down until it clicks into place. This ensures a tight seal.

After securing both sides, go ahead and close the tailgate. Now, your Lund tonneau cover is reinstalled and ready to protect your truck bed once again. Just remember to regularly check the tension of the cover. It should be tight enough to repel water but not overly strained.

In conclusion, Lund tonneau covers are designed for simple installation and removal. They provide superior protection for your truck bed and valuables, ensuring they are safe from harsh weather conditions. Remember to follow the manufacturer’s instructions when reinstalling your Lund tonneau cover to ensure you maintain the warranty and get the most out of your cover.

See more: How To Tighten Tri Fold Tonneau Covers

How Tight Should A Lund Tonneau Cover Be?

The tightness of your Lund tonneau cover is an essential aspect to consider for its optimal performance. It ensures that the cover provides a secure and weather-tight seal to keep your cargo safe from the elements.

A properly tightened Lund tonneau cover should have a smooth, drum-like surface with no sagging. It should be taut enough to prevent water accumulation, yet not so tight that it strains the cover’s material or the mounting hardware. Over-tightening could potentially damage the cover, causing warping or distortion.

To adjust the tightness, refer to the tension control mechanism that comes with your Lund tonneau cover. This mechanism allows for easy and precise adjustments to ensure your cover remains properly tensioned in all weather conditions. Make sure to adjust the tension evenly on both sides of the cover to maintain a balanced and uniform tension.

It’s advisable to regularly check the tightness of your Lund tonneau cover, particularly after installation, and readjust if necessary. As weather conditions change, the cover may loosen or tighten. Regular checks will ensure that the cover maintains the right tension, providing the best possible protection for your truck bed at all times.

Remember, the goal is to maintain a balance. A Lund tonneau cover that’s too loose may not provide the necessary protection against rain, snow, or dust.

On the other hand, a cover that’s too tight may put undue stress on its structure, leading to wear and tear over time. Finding the right level of tightness will ensure the longevity and effectiveness of your Lund tonneau cover.


As a truck owner, you might have a few queries about using and maintaining your Lund tonneau cover. We’ve compiled a short list of commonly asked questions and provided in-depth answers to help enhance your understanding and ensure you get the most from your cover.

How often should I clean my Lund tonneau cover?

Your Lund tonneau cover should be cleaned periodically to maintain its appearance and longevity. Cleaning frequency largely depends on the environment you’re in. If your truck is frequently exposed to harsh weather or dirty conditions, it’s advisable to clean the cover more often.

0Use a mild soap and water solution and gently scrub the cover using a soft-bristle brush. Rinse thoroughly and let it dry completely. Avoid using harsh chemicals or abrasive tools, as they can damage the cover’s surface.

Can I drive with my Lund tonneau cover open?

Yes, you can drive with your Lund tonneau cover open. Lund tonneau covers are designed with support rods that securely hold the cover open while driving.

However, ensure the cover is properly secured in the open position before starting your journey. This not only prevents potential damage but also guarantees the safety of your cargo and other road users.

How do I adjust the latch on my Lund tonneau cover?

Latch adjustment is key to ensuring your Lund tonneau cover fits snugly and securely. Each latch has an adjustment mechanism, typically a set of screws, that allows you to raise or lower it.

To adjust, loosen the screws, move the latch to the desired position, and then tighten the screws again. Always check the cover for proper fitment after adjusting the latch.

Are Lund tonneau covers waterproof?

Lund tonneau covers are designed to provide superior protection against weather elements, including rain. The covers are water-resistant, meaning they can effectively keep your truck bed dry during rainfall.

However, they are not entirely waterproof, as extreme weather conditions or prolonged exposure to water may lead to some seepage around the edges. Regular maintenance and proper installation can help improve the cover’s water-resistance.

Final Thoughts

Owning a truck comes with numerous responsibilities, one of which includes protecting the cargo bed from harsh weather and prying eyes. Lund tonneau covers play a crucial role in offering this much-needed protection. They are designed with unique features that not only enhance the aesthetic appeal of your truck but also increase the overall functionality.

Apart from protection, Lund tonneau covers play a vital role in fuel efficiency. By creating a streamlined surface over your truck bed, they reduce wind drag, which in turn improves gas mileage. This is an often overlooked advantage that can result in significant savings in the long run.

The process of installing, removing, or adjusting a Lund tonneau cover is relatively straightforward, as detailed in this guide. It’s essential to follow the manufacturer’s instructions to the letter to ensure you maximize the benefits and longevity of your cover. Regular maintenance, including cleaning and tension adjustments, will also go a long way in preserving your cover’s quality and aesthetic appeal.

In closing, investing in a Lund tonneau cover is a prudent decision for any truck owner. In addition to providing protection and enhancing fuel efficiency, it also gives your vehicle a sleek, finished look. So, whether you’re a contractor, an outdoor enthusiast, or an everyday driver, a Lund tonneau cover can significantly enhance your truck-owning experience.

Rate this post

Leave a Comment